5.9 5.9L CUMMINS 2004-08 MAHLE STANDARD H/O 17:1 Pistons Matched & Balanced Set of (6)

BRAND NEW Balanced and Matched Set of 6 New MAHLE Pistons MAHLE is OEM (Original Equipment Manufacturer) for Cummins Why waste money on some no-name Asian knock-off brand piston when you can have real US Based MAHLE OEM Quality, for near the same price?? FITS: VIN Codes: ‘C [ETH]’ (2004.5-2008) 5.9 Liter 6BT 24 Valve Dodge Cummins I6 Turbo Diesel Engines VIN code: “C” (8th character of VIN#) THIS LISTING IS FOR STANDARD PISTONS Please pay close attention to the Combustion Bowls in the Top Center of the Pistons. (see pictures) They MUST MATCH the bowls in your pistons This is a complete set of 6 Pistons with Clips & Wrist Pins. MAHLE Pistons 1. Ni-resist top grooves to control groove wear. 2. Balanced Set of 6 for smooth engine operation. 3. The M124 Piston material (used in these pistons) is a highly evolved “Eutectic” material, which contains approximately 12% silicon for excellent strength and excellent thermal expansion properties. For diesel engines, the Eutectic material is chosen because it bonds better with the ring land or ring groove inserts used to strengthen and better support the piston rings in high performance/ high load diesel applications. The Eutectic material with MAHLE’s ring groove inserts make a better piston than a forged material which does not hold the insert very well. MAHLE Piston Pins 1. High strength steels meet structural requirements to prevent pin breakage or deflection. 2. Case hardened to provide long lasting wear surfaces. 3. A high degree of dimensional and surface finish control are the final requirements for strength and long life.
FITS: (2004.5-2008) 5.9 Liter 6BT 24 Valve Dodge Cummins I6 Turbo Diesel Engines VIN code: “C” (8th character of VIN#)
MAHLE is OEM (Original Equipment Manufacturer) for Cummins Pistons
Matched & Balanced set of 6 Pistons
Please pay close attention to the Combustion Bowls in the Top Center of the Pistons. (see pictures) They MUST MATCH the bowls in your pistons
Why waste money on some no-name Asian knock-off brand piston when you can have real US Based MAHLE OEM Quality, for near the same price??